硫化器,膠帶硫化器專業專業廠家

杆端關節軸承
無錫AG集团礦冶設備製造有限公司
 
  硫化器
  修補器
  防爆硫化器
  電纜熱補器
  剝皮機
  配件
聯係AG集团

地址:江蘇省無錫市錫山區錫北鎮
手機:18021199588 許經理
電話:0510-83910058
傳真:0510-83910068
郵箱:wxeca001@163.com
513788880@qq.com
網址:http://www.okpctools.com

 
 

不要在雨天在室外使用硫化機

發布者:admin  發布時間:2018-11-20  點擊:84
1、硫化機存放環境是應保持幹燥、通風良好的環境中在使用,以免生鏽;
3、如果是了工作環境潮濕、多水,在是拆卸搬運硫化機時,應在地麵用物品墊高,不要讓硫化機同水直接接觸;
4、如果在使用過程中,因操作不當導致加熱板進水,應首先聯係廠家進行維修。如果需要進行應急搶修,可將加熱板上蓋板打開,先將水倒出,然後將電控箱設置為手動操作,加溫到100℃,保持恒溫半個小時,將線路烘幹,在在手動狀態下進行皮帶膠接。同時應及時聯係生產廠家,進行線路的整體更換。
6、每次使用結束後,應當將水壓板內的水放幹淨,尤其是冬季,如果水不能放幹淨,往往導致水壓板膠皮過早老化,水壓板使用壽命降低;
7、正確的放水方式是,在硫化保溫結束後,硫化機未拆卸前進行。如果在機器拆卸後放水,有可能導致水壓板內的水無法徹底排出。

1, vulcanizing machine storage environment should be kept in dry, well ventilated environment in use, so as not to rust.

3. If the working environment is wet and water-rich, when the vulcanizer is dismantled and handled, it should be padded with articles on the ground, and do not let the vulcanizer contact with water directly.

4. If improper operation results in water inflow of heating plate in the process of use, it is necessary to contact the manufacturer for maintenance first. If emergency repair is needed, the heating plate cover can be opened, the water is poured out first, then the electric control box is set to manual operation, heating to 100 C, keeping constant temperature for half an hour, drying the circuit, and bonding the belt in the manual state. At the same time, manufacturers should be contacted in time for overall replacement of lines.

6. After each use, the water in the water pressure plate should be cleaned, especially in winter. If the water can not be cleaned, it will often lead to premature ageing of the rubber and reduce the service life of the water pressure plate.

7. The correct way to release water is to carry out the vulcanizing machine before it is removed. If the water is released after the machine is dismantled, it may cause the water in the water pressure plate to not be discharged completely.
    
 
 
copyright © 無錫AG集团礦冶設備製造有限公司 版權所有
地址:江蘇省無錫市錫山區錫北鎮 手機:18021199588 電話:0510-83910058 傳真:0510-83910068